Bricked X1 8902

Vmade T2+S2-8902 STB
Vmade T2+S2-X1 STB
Vmade T2+S2+C-X3 STB
Post Reply
shunn
Posts: 1
Joined: Mon Jul 06, 2020 4:48 am

Bricked X1 8902

Post by shunn » Mon Jul 06, 2020 5:00 am

Hello. I updated user database file from an older firmware to the updated firmware and now my STB is dead  :( - after turning on it says "Welcome to HD DVB World COMBO T2+S2" for a brief moment and then the screen goes black and stays so. Is there any method to unbrick it?

21nikolas
Posts: 4
Joined: Thu Jun 04, 2020 3:06 am

Re: Bricked X1 8902

Post by 21nikolas » Tue Jul 14, 2020 4:38 am

Hi !
Download a firmware for your box. Rename it to flash.bin Put only "flash.bin" file in the usb key . Nothing else. Plug the usb key to receiver. Then plug the power and immediately press the "menu" button. Dont press it continuously but repeatedly (press then release again and again) . You will see the message. Wait 1-2 minutes to restore.

admin
Site Admin
Posts: 15
Joined: Thu Jan 01, 1970 8:00 am

Re: Bricked X1 8902

Post by admin » Thu Jul 16, 2020 10:08 am

shunn wrote:
Mon Jul 06, 2020 5:00 am
Hello. I updated user database file from an older firmware to the updated firmware and now my STB is dead  :( - after turning on it says "Welcome to HD DVB World COMBO T2+S2" for a brief moment and then the screen goes black and stays so. Is there any method to unbrick it?
The phenomenon after the upgrade indicates that you may have upgraded the firmware that does not match it, which prevents you from entering the operation interface normally.

Post Reply